GODMADE Replacement Knob Stem Instructions
Replacement Knob Stem Installation
Everything you need to swap in your GODMADE™ stem and get your GE Café range back to smooth, confident operation.
Before You Begin
Estimated installation time: 5–10 minutes
- Turn all burners OFF.
- Remove the broken stem.
- Remove any D-spring fragments from the valve shaft.
- Center the bezel before reinstalling the knob.
Failure to follow these steps may result in improper installation, knob malfunction, or damage to your appliance.
Compatibility
Confirm before installingThis replacement stem is designed exclusively for GE Café Commercial-Style Gas Range Burner Control Knobs that contain Stem Assembly Part #307D1043P001.
| Part Number | Description |
|---|---|
| WB03X39571 | Multi-Ring Knob — Black Stainless |
| WB03X39560 | Multi-Ring Knob — Bronze |
| WB03X39559 | Multi-Ring Knob — Copper |
| WB03X39555 | Multi-Ring Knob — Stainless |
| WB03X46000 | Knob Assembly — Brushed Brass |
| WB03X45949 | Multi-Ring Knob — Flat Black |
| WB03X39558 | Burner Knob — Black Stainless |
| WB03X39547 | Burner Knob — Bronze |
| WB03X39579 | Burner Knob — Copper |
| WB03X39553 | Burner Knob — Stainless |
| WB03X45999 | Knob Assembly — Brushed Brass |
| WB03X45950 | Burner Knob — Flat Black |
- CGU366P2TS136" Commercial-Style Gas Rangetop with 6 Burners
- CGU486P3TD148" Commercial-Style Gas Rangetop with 6 Burners and Integrated Griddle
- CGY366P4TW236" Commercial-Style Gas Rangetop with 6 Burners
- C2Y366P2TS136" Smart Dual-Fuel Range with 6 Burners
- C2Y486P3TD148" Smart Dual-Fuel Range with 6 Burners and Integrated Griddle
If your appliance model or knob part number is not listed above, this stem replacement is not guaranteed to fit. Check the part number printed inside your knob before purchasing.
What's in the box
- 1× GODMADE™ Replacement Knob Stem
Tools required
- Phillips head screwdriver
- Pliers (if needed)
Safety Notes
Read carefullyDo not attempt installation while the range is on or connected to gas without first confirming all burners are off.
Ensure the gas valve shaft is fully free of debris before reattaching the knob.
If the knob does not depress or turn smoothly after installation, remove the knob and re-examine the bezel alignment and shaft for obstructions before operating the range.
This product is intended for stem replacement only — it does not replace the full knob assembly.
Installation
8 stepsRemove the broken stem from the knob
Using a Phillips head screwdriver, remove the two screws securing the stem inside the knob. Remove the broken stem.
Install the replacement stem
Seat the GODMADE™ replacement stem into the knob backing and secure it with the two screws.
Ensure stem slot is aligned with the knob block
Remove the knob bezel from the range
Unscrew the two screws securing the knob bezel to the range and set it aside.
Inspect the gas valve shaft
Visually inspect the gas valve shaft to ensure it is clear of any leftover D-spring fragments. When a stem breaks, a D-spring can remain on the shaft and will prevent the knob from depressing and turning properly. Remove any fragments before proceeding. Pliers may be helpful for this step.
Reattach and center the knob bezel
Reattach the knob bezel to the range and ensure it is properly centered on the gas valve shaft. A misaligned bezel will block or create friction with the knob, preventing proper depression and turning.
Secure with two screws, centered on the gas valve shaft
Attach the knob
With the bezel secured and centered, slide the knob and replacement stem onto the gas valve shaft.
Test operation
Fully depress the knob and rotate it to verify smooth, proper operation before use.
Leave a review
We appreciate and value your feedback. Your reviews are critical to our business and products.
How did it go?
Your review helps other GE Café owners find a fix — and helps us keep improving.
Leave a Review on Amazon